3 lb Digital Postal Scale
5 lb Digital Postal Scale
10 lb Digital Postal Scale
25 lb Digital Postal Scale
100 lb Portable Digital USB Postal Scale
250 lb Portable Digital USB Postal Scale
400 lb Portable Digital USB Postal Scale
Can mechanical postal scales be calibrated?
Mechanical scales cannot be calibrated. The only adjustment that can be performed is to manually align the position of the pointer with the zero weight mark using the Zero Adjustment Knob. To locate the Zero Adjustment Knob, please consult the users guide for your particular scale.
Are the scales completely assembled?
The majority of scales are completely assembled. Some scales may require very minor assembly.
The dial I just installed rubs against the pointer. What should I do?
Check to see if the pointer has scratched the new dial. If it has, discard it and replace it with a new one. If not, remove it and reinstall the dial. Remove the dial and start over following the instructions provided.
The reading on my scale fluctuates, how can I resolve this?
The scale should be situated on a flat, level, and stable surface. The scale platform should be securely fastened to the scale sub-platform. The scale can be affected by electrical and RF (Radio Frequency) interference. Operation near power transmission lines is not recommended. Operation near appliances which switch on and off with heavy currents (letter openers, copiers, microwave ovens) is not recommended. The recommended operating temperature for the scale is room temperature (around 77 degrees Fahrenheit ). Allow the scale three hours to adjust to a the new climate if the scale was stored in a location a hot/cold environment. If the scale is to be operated in environments above or below room temperature, it is recommended that the scale be re-calibrated in that environment after a three hour adjustment period.
What is a load cell?
A load cell is a mechanism in the scale which bends slightly when weight is put onto the platform. The microcomputer in the scale measures the amount of bending and translates that into the digital display, which is the weight.
What does the term overload" mean in relation to my scale?
Overload" can have different meanings, all having to do with a weight that is too high. It may mean the weight placed on the scale exceeds its capacity, such as putting 15 lbs on a 10 lb scale. On a rate-calculating scale, it may mean you are trying to perform a function which cannot be performed with the weight registered on the scale, such as attempting to send a 5 lb letter using a service restricted to 1 lb letters. Symbols of overload include OVLD and OOOO.
Can I wash my scale?
We do not recommend that our scales be submerged in any type of fluid. You may clean the tray of the scale with a mild cleaner.
How do I know if my scale is weighing accurately?
The only sure way to determine if your scale is weighing correctly is by placing a known weight on the scale. Examples of a known weight" would include a piece from a precision weight set, or perhaps a measured weight used for exercising.
For a better site experience, upgrade your browser today.